Pliers Functions and Various Pliers. Pliers are one of the hand tools that are often used in automotive workshops. Pliers are made of steel and coated with hard rubber on the holder pliers.
There are many types of pliers used, each type of pliers has a different function, but in general, pliers have a function to hold the workpiece.
Some types of pliers can be used to open or loosen nuts or bolts, but to open nuts or bolts requires a lot of energy to be able to grip nuts or bolts firmly (except for alligator pliers), but using pliers to loosen nuts or bolts is not recommended because can damage the side of the nut or bolt, it’s better to use equipment that does work to open the nut or bolt such as a shock lock, ring lock or wrench.
In addition, some types of pliers can be used to cut small metal objects such as wires or cables because the jaws of the pliers have sharp jaws. For more details about the various types of pliers, consider the description below.
Pliers Functions and
Various Pliers
1. Pliers combination
Combination pliers (combination pliers) are one type of pliers that serves to clamp or hold a workpiece, bend wires and to cut wires.
2. Taper pliers
Taper pliers (needle nose pliers / long nose pliers) are one type of pliers that serves to clamp small objects or to clamp objects in tight spaces. This sharp tang has a tapered tip and resembles a crocodile’s snout.
3. Cutting pliers
Cutting pliers (cutting pliers) is one type of pliers that serves to cut small metals such as to cut wires, cut wires and so forth. In the jaw of this tang has a sharp and pointed jaw shape. If these pliers are used to cut large or hard metals, they can damage the jaws of the pliers.
4. Pliers snap ring
Pliers snap ring (circlip pliers) is one type of pliers that serves to clamp snap rings (circlip). Pliers snap ring, there are two models, namely the model with a straight end and a bent end model. In addition, there are two types of snap ring pliers namely snap ring pliers when pressed the tip of the handlebar opens and snap ring pliers when pressed the end of the handlebar closes.
5. Tower pliers
Tower pliers are one type of pliers that serves to cut the wire and to pull out nails.
6. Tang crocodile
Pliers crocodile (locking pliers tool kit) or also often referred to as pin pliers have a snout shape similar to a crocodile. Pliers crocodile is one of the types of pliers that serves to lock and remove the bolt. The distance between these two jaws can be adjusted, if you want to use a wide bolt to clamp the width of the jaw must also be set wide. This arrangement can be done by turning the regulating nut located on the back of the lever.
7. Pliers slip joint
Slip joint pliers are one type of pliers that has the function to clamp or hold the workpiece and the shape is the same as a combination pliers. The best slip joint pliers can be shifted at the slip joint to change the width of the distance between the two jaws from the pliers.
8. Rivet pliers
Rivet pliers are one type of pliers used to mount rivets.
9. Cable peeler pliers
The crimping pliers tool kit is one type of pliers that serves to cut or peel the cable skin. In the cable peeler section on these pliers has several sizes, from small to large sizes so that when you will use these cable stripping pliers then adjust the size of the diameter of the cable wire with the cutter or peeler section of these pliers.
Conclusion
As a simple lever that is commonly used in daily activities, the existence of pliers is very important and mandatory for you to have. Choices like practical folding pliers, or versatile pliers you can choose for more varied needs. Well, for more information, please click the link on this blog.